Kustom Canz 1K Primer:
Kustom Canz 1k Primer is a premium primer-surfacer for fast spot priming providing a smooth pin hole free surface that is easily sanded. Can be used directly onto many difficult substrates including alloy, stainless steel, zintec and galvanized.
Kustom Can 1K Primer is available in 3 colours: White, Grey and Black
400ml 1K Primer Performance:
- Excellent adhesion and anti-corrosive properties.
- Quick drying-times.
- Spray gun finish achievable.
- Excellent smooth surface finish.
- Particularly suitable for vehicle spot repair.
- Available in 3 colours: white, grey & black.
APPLICATION:
- Remove all rust from metal surfaces.
- Clean surface with a suitable degreaser then abrade.
- Areas to be sprayed must be dry, free of grease and dust.
- Shake the aerosol can for at least two minutes after the agitator ball is free
- Carry out a test spray before spraying your project.
- Apply 1-2 coats wet coats,
- leave 10-15 minutes between coats.
- Drying time 30-60mins @ 20`C or 3 minutes using infrared heat.
- After use, turn the aerosol can upside down and spray to clear the valve.
Kustom Canz 1K Plastic Primer
A low solid, fast drying, transparent ready for use primer designed to provide adhesion to a wide range of plastics. Specially designed for flexible plastic car parts manufactured from, polyolefin, polypropylene and ethylene propylene modified. A524 Primer should be used only on those plastic parts that have no existing primer or other coating applied.
Use of a 2 component undercoat prior to topcoat is not necessary unless higher build is required. The plastic
primer can be topcoated directly.
- Excellent adhesion.
- Quick drying-times.
- Ideal for transparent plastic.
APPLICATION:
- Clean surface with a suitable degreaser
- Areas to be sprayed must be dry, free of grease and dust.
- Shake the aerosol can for at least two minutes after the agitator ball is free.
- Carry out a test spray before spraying your project.
- Apply 2 coats coats.
- Leave 5 minutes between coats.
- Wait 15 minutes before beginning paint process.
- After use, turn the aerosol can upside down and spray to clear the valve.