Inspire - Solvent Based Airbrush Paints

Description:

Alien Glow is a glow in the dark paint. This is clearly the best glow in the dark product available with outstanding after glow of up to 24 hours.

For best effects, apply Alien Glow over a White Base.

All colours come ready to use.

Inspire Airbrush Alien Glow Colours:

• Blue - up to 24 hours Glow Time
• Green - up to 24 hours Glow Time

Application:

• Always spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Apply 2-3 coats of White Basecoat leaving 10-15 minutes between coats.
• Apply 2-5 coats of Alien Glow depending on the effect you desire. Leave 10-15 minutes between coats. 
• Apply 2K Show Clear for a Real Deep Gloss finish.

Alien Glow CANZ:

Our award winning Alien Glow is now available in 150ml & 400ml aerosol cans. The Kustom Canz range gives high output with excellent atomisation and high transfer efficiency with no pressure drop during application. Using our Kustom Canz range can save on time and labour without the requirement of expensive spraying equipment.

To get the best result from Alien Glow CANZ we recommend using White Base as a ground coat and finishing with our market leading Kustom Canz 2K Clearcoat.

Description:

The Inspire Aluminium range has exceptionally high coverage and is easy to spray with good flow characteristics. Inspire Aluminium is often used as a Base for Candy Colours.

All colors come ready to use.

There are 3 Aluminium Sizes:

• Inspire Aluminium (Fine)
• Inspire Aluminium (Medium)
• Inspire Aluminium (Coarse)

Application:

• Always spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Apply 2-3 coats of Basecoat leaving 10-15 minutes between coats.
• Apply 2-5 coats of Aluminium depending on the effect you desire. Leave 10-15 minutes between coats. 
• Apply 2K Show Clear for a Real Deep Gloss finish.

Description:

Inspire Airbrush Base Colours exhibit bright and vivid colours. All colours come ready to use.

All colours are intermixable to create thousands of colours. Base Colours can also be mixed with our other products: Candy, Spectracoat, Sparkle Pearl, Flip Paints, etc.

Inspire Airbrush Base Colours:

• Black Base
• Blue Lagoon Base
• Blue Waves Base
• Brown Base
• Clear Water Base
• Cotton Candy Base
• Dark Blue Base
• Dark Red Base 
• Flesh Tone Base
• Fruit Punch Base
• Green Base
• Lemon Base
• Lemon Drop Base
• Light Blue Base
• Light Green Base
• Light Grey Base
• Light Purple Base
• Lilac Base
• Mint Green Base
• Mustard Base
• Orange Base
• Peppermint Base
• Pink Base
• Red Base
• Red Ochre Base
• Robin's Blue Base
• Sky Blue Base
• White Base
• Yellow Ochre Base

Description:

Up your Airbrushing with our Flesh Tone colors! Create real life tone in your paintings, murals and other projects with our Bass Flesh Tone colors and create your world the way you see it!

Inspire Airbrush Base Flesh Colors:

• Blush
• Brown
• Deep Shadow
• Flesh Tone
• Hi Light Flesh
• Light Flesh
• Mid Tone Blender
• Mid Tone Shadow

Description:

The Inspire Airbrush Base Metallic range now includes several new and exciting colours. Base Metallics have exceptionally high coverage, are easy to spray and possess high vertical stability with good flow characteristics.

 All colours come ready to use.

Inspire Airbrush Base Metallic Colours:

• Base Metallic Ash Black
• Base Metallic Black
• Base Metallic Blue
• Base Metallic Coral Red
• Base Metallic Dark Gold (Coarse)
• Base Metallic Day Dreamer Blue
• Base Metallic Dipsy Blue
• Base Metallic Evergreen
• Base Metallic Gold
• Base Metallic Green
• Base Metallic Grey
• Base Metallic Ice Blue
  
• Base Metallic Kiwi Lightning
• Base Metallic Limoncello
• Base Metallic Mandarin
• Base Metallic Mocha
• Base Metallic Mystic Purple
• Base Metallic Pink
• Base Metallic Purple
• Base Metallic Red
  
• Base Metallic Rose Gold
• Base Metallic Sahara Sand
  
• Base Metallic Silver (Fine)
• Base Metallic Silver (Medium)
• Base Metallic Silver (Coarse)
• Base Metallic Sweet Pea
• Base Metallic Turquoise
• Base Metallic Venetian Red
• Base Metallic Wishful Pinkin'

Application:

• Always spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
  
• Apply 2-5 coats of Base Metallic depending on the effect you desire. Leave 10-15 minutes between coats. 
• Apply 2K Show Clear for a Real Deep Gloss finish.

Description:

Base Pearlz colours have a massive depth of colour and a shimmering iridescence that leaves other Basecoats looking lifeless, dull and boring! Our Base Pearlz have an extreme amount of Pearl Luster.

Base Pearlz come in a wide range of colours. They can be simply top coated or used as a Basecoat for our Candy, Liquid, Passion, etc. 

The Inspire Airbrush  colours come ready to use.

Inspire Airbrush Base Pearlz Colours:

• Blue Grape (Best used over White Base)
• Blue Ocean (Best used over White Base)
• Bondi Beaches (Best used over Blue Waves Base)
• Champagne Pink (Best used over White Base)
• Coconut (Best used over Black Base)
• Daytona Beaches (Best used over Mint Green Base)
• Fizzy Pink (Best used over White Base)
• Honey (Best used over White Base)
• Hot Salsa (Best used over White Base)
• Key West (Best used over a Blue Waves Base)
• Miami Pink (Best used over a Pink Base)
• Monza Red (Best used over a Red Base)
• Novak Purple   (Best over White Base)
• Orange Fusion (Best used over White Base)
• Oriental Blue (Best used over White Base)
• Peachy King (Best over White Base)
• Pineapple (Best used over White Base)
• Pink Fantasy (Best used over White Base)
• Purple Lust (Best used over White Base)
• Purple Surfer (Best used over White Base)
• Purple Velvet (Best used over White Base)
• Sky Black (Best used over Black Base)
• Snow White (Best used over White Base)
• Sugar Apple (Best used over White Base)
• Sunburst (Best used over White Base)
• Tobago Bay (Best used over Blue Waves Base)

Application:

• Always spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Apply 2-3 coats of Basecoat leaving 10-15 minutes between coats.
• Apply 2-5 coats of Base Pearlz depending on the effect you desire. Leave 10-15 minutes between coats. 
• Apply 2K Show Clear for a Real Deep Gloss finish.

Description:

Candy brings you the ultimate custom effect. For best results we recommend using our Base Metallic Silver Coarse but as Candy colours are completely transparent, they can be applied over any base colour/effect to create your own unique finish.

Candy colours can be faded into each other and also intermixed to create your very own custom colour.

All colours come ready to use.

Inspire Airbrush Candy Colours:

• Black Candy
• Blue Candy
• Blueberry Candy
• Brown Candy
• Cherry Red Candy
• Deep Red Candy
• Emerald Candy
• Fools Gold Candy
• Gold Candy
• Green Candy
• Moss Green Candy
• Ocean Candy
• Orange Candy
• Red Candy
  
• Ruby Red Candy
• Sugar Plum Candy
• Teal Candy
• Yellow Candy

Application:

• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Apply 2-3 coats of base coat leaving 10-15 minutes between coats. 
• Allow 1 hour (maximum 24 hours)  before continuing to the next stage.
• Apply 3-5 coats of Candy depending on the effect you desire, leaving 15 minutes between coats. The more coats you apply, the more deeper and richer the colour will become.  
• Allow 1 hour (maximum 24 hours)  before continuing to the next stage.
• Apply 2K Show Clear for a real deep gloss finish.

Description:

Candy Intensifier "Concentrate" brings you the ultimate custom finish. Candy Intensifier is used to richen any of our Candy range. Candy Intensifier "Concentrate" is perfect for motorcycles or small parts when speed is a factor.

Candy Intensifier "Concentrate" is not generally recommended for exterior on over all Candy completes.

Inspire Airbrush Candy Intensifier Colours:

• Black Candy
• Blue Candy
• Blueberry Candy
• Brown Candy
• Cherry Red Candy
• Deep Red Candy
• Emerald Candy
• Fools Gold Candy
• Gold Candy
• Green Candy
• Moss Green Candy
• Ocean Candy
• Orange Candy
• Red Candy
• Ruby Red Candy
• Sugar Plum Candy
• Teal Candy
• Yellow Candy

Description:

Chromacoat shifting effect changes colour right before your eyes. Chromacoat finishes are based on the revolutionary ChromaFlair Colour shifting colorants. These are unique colorants that offer previously unattainable colour performance, they actually change colour depending on the angle from which they are viewed. More than just a subtle variation in shade, the colour undergoes an almost magical transformation in appearance. Rounded, curved surfaces and sharp angles will highlight the magical appearance of Chromacoat.

 All colours come ready to use. 

Inspire Airbrush Chromacoat Colours:

• Chromacoat Autumn Spice - Shifts from Copper Orange - Gold - Green
• Chromacoat Blue - Shifts from Blue - Red - Gold
• Chromacoat Copper - Shifts from Copper - Blue - Purple
• Chromacoat Cyan - Shifts from Cyan - Purple - Gold
  
• Chromacoat Fireball - Shifts from Black - Red - Gold
• Chromacoat Flamingo - Shifts from Purple - Pink - Gold - Green
• Chromacoat Gold - Shifts From Gold - Silver
• Chromacoat Golden Night - Shifts from Gold - Silver - Blue
• Chromacoat Green - Shifts from Green - Blue - Purple - Gold
• Chromacoat Heather - Shifts from Pinky Purple - Blue - Violet
• Chromacoat Key Lime - Shifts from Gold - Green - Blue - Purple
• Chromacoat Peacock - Shifts from Green - Blue - Purple - Green
• Chromacoat Purple - Shifts from Purple - Green - Violet
• Chromacoat Red - Shifts From Red - Gold
• Chromacoat Silver - Shifts from Silver - Green - Purple
• Chromacoat Siren - Shifts from Silver - Green - Blue - Purple
• Chromacoat Smokin Charcoal - Shifts from Dark Purple - Grey - Green - Blue - Violet
• Chromacoat Sunrise - Shifts from Gold - Silver - Purple
• Chromacoat Swift Green - Shifts from Green - Blue
• Chromacoat Voodoo - Shifts from Purple - Green

Application:

• Always spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Apply 2-3 coats of Black Basecoat leaving 10-15 minutes between coats.
• Apply 2-5 coats of Chromacoat depending on the effect you desire. Leave 10-15 minutes between coats. 
• Apply 2K Show Clear for a Real Deep Gloss finish.

Description:

Chrome Coating can give you an outstanding Chrome/Mirror effect with up to 98% reflectivity of real chrome plating. Deception Chrome is a the most reflective coating available and is easy to apply without any special equipment. It can be applied with any high quality paint gun and dries instantly into a brilliant, mirror-like finish.

Chrome can be applied with almost any type of spray equipment from airbrushes to full size HVLP guns. Deception Chrome goes a long way, it is sprayed at 20-40 psi with 10-15% volume exiting the spray gun. Just mist it over the surface until you have a even disposition. To achieve the highest mirror-like reflectivity, lies in the surface preparation of the object you are painting. The smoother, more "glass-like" your surface is, the more reflective the final appearance will be.

Application:

• 1st Step if you've never sprayed this product is to do test samples, or call our help line and get guidance to apply this product correctly, as this will not be sprayed the same as a regular base coat paint.
• Apply a Black Basecoat.
• Allow the Basecoat to fully dry 45 minutes and now you are ready to apply the topcoat 2K Show Clear. (If your surface already has a glass like finish, move to Step 4.)
• Apply 2 coats of 2K Show Clear and allow to dry. NOTE: We Recommend you to wait 36 Hours for all of the tail solvents to evaporate before you can proceed to Step 4. You can now sand and buff if necessary to remove any surface imperfections, you will need to be sure to remove all compounds and wax residues with rubbing alcohol to insure a streak-free surface prior to applying the Chrome.
• Begin applying 2-4 coats of Chrome using a dusting effect, a very small volume of material with a substantial amount of air. If you are using an HVLP gun you should be around 20 psi, otherwise use whatever the recommended air pressure is for your gun, remembering to keep the material volume very low.
• Between Coats use a very soft lint-free cloth and carefully remove all of the excess "dust" from the surface every time, when you complete this step you will notice an improvement in the appearance. When you have finished applying our Chrome coating use a very soft clean lint-free cloth, soak the cloth with clean warm water and carefully wash the object to remove all of the excess "dust" from the surface. Once you complete this step you will notice an improvement in the final appearance.
• Allow the Chrome to (Air dry 30 minutes or Bake 140 F for 15 minutes). Be sure all moisture is removed prior to moving on to the next step.
• You will now apply our 1K Clearcoat to the Chrome to "seal" and allow to dry. (Air dry 60 minutes or Bake 140 F for 15 minutes).
• Apply the 2K Show Clear and allow to dry, If you are applying this to a object that will be handled frequently or exposed to the elements you will want to apply our 2K Show Clear.

Description:

Crystal brings you a free flowing colour change (Flip Paint) unlike any other coating seen before. For the most dramatic effect, apply Crystal over a dark coloured Basecoat but it can be applied over a light coloured Basecoat for a softer iridescent look, yet still intense colour change. The colour possibility is endless and brings a new dimension to your product.

All colours come ready to use.

Inspire Airbrush Crystal Colours:

• Crystal Blue
• Crystal Gold
• Crystal Green

Application:

• Always spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Apply 2-3 coats of Basecoat leaving 10-15 minutes between coats.
• Apply 2-5 coats of Crystal depending on the effect you desire. Leave 10-15 minutes between coats. 
• Apply 2K Show Clear for a Real Deep Gloss finish.

Description:

ICE FX is a self-activated coating that works over a smooth or sanded surface and achieves full crystallization in about 10-20 minutes. Using ICE FX, you have the ability to create the final unique pattern and effects which are truly amazing!

Apply ICE FX on motorcycle tanks and guards, also feature panels on motor cars, trucks, caravans, boats, jet ski's, surfboards, skateboards, bench, counter tops and almost any other object.

All colours come ready to use.

Application:

ICE FX is inexpensive and simple to use, with a little practice almost anyone can become an expert. Simply follow our easy to follow step-by-step instructions.

• Prepare and paint the surface with your choice of our Base Colours. This Base colour will become the colour that shows the lines through the crystals.
• Apply the ICE FX in a lighter coat for small crystals, and a wet or heavy coat to achieve the large crystal effect across the surface.
• ICE FX will achieve full crystallization usually within 10-20 minutes at an average temperature of 20C - 25C. Wait for complete forming of crystals on the entire area you are working on.
• By applying heat you can force the crystals to dry quickly, this will result in a small tight woven crystals. While allowing them to air dry will produce larger, spaced crystals.
• Once dry, now apply your contrasting colour (the colour that will be shown through the spaces in the crystals). Apply this coat in a light dusting action. Note: Take care to apply only light coats, as a wet coat of paint will make it hard to remove the crystals.
• Using lots of warm water and a rag or sponge, scrub off the crystals. This will leave you with a very pronounced crystal design.
• Allow any excess water to dry.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Description:

Liquid custom colours are used to produce colour changing paint (Flip Paint) finishes that range from very subtle to very dramatic. The colour of the Basecoat applied under the Midcoat dramatically effects the final colour and shift colour. Dark coloured Basecoats provide the most colour change, with light coloured Basecoats providing clear and sophisticated pastel and opalescent colour shifts. Each Liquid custom product has the potential to produce an infinite number of colour shift effects depending on Basecoat colour selection.

(Note: This product is a translucent Midcoat and will require spraying over the coloured Basecoat as stated in the pictures provided. Basecoat colours are not included.)

All colours come ready to use.

Inspire Airbrush Liquid Colours:

• Liquid Charcoal - Shifts from Grey - Green - Blue
• Liquid Emerald - Shifts from Green - Blue
• Liquid Gold - Shifts from Gold - Green - Blue
• Liquid Purple  - Shifts from Purple - Red - Gold - Green

Application:

• Always spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Apply 2-3 coats of Basecoat leaving 10-15 minutes between coats.
• Apply 2-5 coats of Liquid depending on the effect you desire. Leave 10-15 minutes between coats. 
• Apply 2K Show Clear for a Real Deep Gloss finish.

Description:

Lumo brings you the brightest custom paint finish. Lumo Paint is a high visibility Fluorescent coating in daylight and artificial light. For best results use a White Basecoat. Please remember to pick your application of this product carefully, it has limited lightfastness. USE WITH DISCRETION.

All colours come ready to use.

Inspire Airbrush Lumo Colours:

• Green Lumo
• Orange Lumo
• Pink Lumo
• Red Lumo
• Yellow Lumo

Application:

• Always spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Apply 2-3 coats of White Basecoat leaving 10-15 minutes between coats.
• Apply 2-5 coats of Lumo depending on the effect you desire. Leave 10-15 minutes between coats. 
• Apply 2K Show Clear for a Real Deep Gloss finish.

Description:

Marble offers you an exciting paint finish. With Marble you can achieve the appearance of a deep marble, snake skin, plus many other effects. Marble is applied as a Midcoat that can simply be cleared over or try it with our Candy Paints. (Note: This is a Water Based Coating)

All colours come ready to use.

Inspire Airbrush Marble Colours:

• Aluminium Marble
• Blue Marble
• Gold Marble
• Green Marble
• Purple Marble 
• Red Marble
• Silver Marble

Application:

Marble is easy to apply. For best results use a Black Basecoat, but using different colours will give you a real custom effect.

• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Apply 2-3 coats of Basecoat leaving 10-15 minutes between coats. Wait 1 hour before applying the Marble Effect to ensure Basecoat is fully dry.
• Stir Marble well. Marble is ready to use
• Apply 1 WET coat. Immediately use cling wrap, plastic sheeting or your choice of texturing tool to produce the desired effect. Apply cling wrap to the entire part, rub the cling wrap down with your hand to insure contact with surface, then remove the cling wrap leaving you with a marble like finish.
• Allow 1-2 hours drying time before applying a Candy or a 2K Clearcoat.

Description:

Marble FX offers you an exciting paint finish. With Marble FX you can achieve many effects, including a deep marble or snake skin appearance with a changing colour effect. Marble FX is applied as a Mid coat that can simply be cleared over or try it with our Candy Paints. (Note: This is a Water Based Coating)

 All colours come ready to use.

Inspire Airbrush Marble FX Colours:

• Blue Marble FX
• Desert Marble FX
• Green Marble FX
• Kiwi Marble FX
• Purple Marble FX

Application:

Marble FX is easy to apply. For best results use a Black Basecoat, but using different colours will give you a real custom effect.

• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Apply 2-3 coats of Basecoat leaving 10-15 minutes between coats. Wait 1 hour before applying the Marble FX to ensure Basecoat is fully dry.
• Stir Marble FX well. Marble FX is ready to use.
• Apply 1 WET coat. Immediately use cling wrap, plastic sheeting or your choice of texturing tool to produce the desired effect. Apply cling wrap to the entire part, rub the cling wrap down with your hand to insure contact with surface, then remove the cling wrap leaving you with a marble like finish.
• Allow 1-2 hours drying time before applying a Candy or a 2K Clearcoat.

Description:

Inspire Airbrush Military Colours exhibit bright and vivid colours. All colours come ready to use.

All colours are intermixable to create thousands of colours. Military Colours can also be mixed with our other products: Candy, Spectracoat, Sparkle Pearl, Flip Paints, etc.

Inspire Airbrush Military Colours:

• Battleship Grey
• Black Shadow
• Blood Stripe
• Brown Leather
• Dark Tan
• Delta Grey
• Destroyer Grey
• Federal Yellow
• Ghost Grey
• Jungle
• Navy Blue
• Olive Drab
• Sand Dune 
• Storm White 
• Swamp Green

Description:

Passion brings you a smooth, free flowing colour change (Flip Paint) unlike any other coating seen before. For the most dramatic effect, Passion is applied over a Black Basecoat but it can be applied over a lighter Basecoat for a softer, iridescent look yet still intense colour change. The colour possibility is endless and brings a new dimension to your product.

All colours come ready to use.

Inspire Airbrush Passion Colours:

• Blue Passion - Shifts from Turquoise to Blue to Purple
• Desert Passion - Shifts from Pinky Red to Gold to Green
• Green Passion - Shifts from Green Turquoise to Bright Silver to Red to Gold
• Kiwi Passion - Shifts from Green to Silver to Red to Orange
• Purple Passion - Shifts from Strong Purple to Silver to Green to Blue
• Tropical Passion - Shifts from Gold to Silvery Green to Deep Blue

Application:

• Always spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Apply 2-3 coats of Basecoat leaving 10-15 minutes between coats.
• Apply 2-5 coats of Passion depending on the effect you desire. Leave 10-15 minutes between coats. 
• Apply 2K Show Clear for a Real Deep Gloss finish.

Description:

Inspire Airbrush Pearls are the very best on the planet. Our Pearls exhibit the brightest and most vivid colours!

(Note: This product is a translucent Midcoat and can be sprayed over any Base colour. All pictures provided are sprayed over a White Basecoat. Base colours are not included.)

All colours come ready to use.

Inspire Airbrush Pearl Colours:

• Blue Pearl
• Gold Pearl
• Green Pearl
• Indigo Pearl
• Magenta Pearl
• Orange Pearl
• Purple Pearl
• Red Pearl
• Silver Pearl
• Solid Copper Pearl
• Solid Rich Gold Pearl
• Turquoise Pearl

Application:

• Always spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Apply 2-3 coats of Basecoat leaving 10-15 minutes between coats.
• Apply 2-5 coats of Pearl depending on the effect you desire. Leave 10-15 minutes between coats. 
• Apply 2K Show Clear for a Real Deep Gloss finish.

Description:

Shadow Chrome produces the most realistic Metallic Paint finishes available. Anyone can reproduce the authentic look of real metal in minutes. Shadow Chrome can be found on a variety of OEM applications ranging from Alloy wheels to interior components.

Application:

Shadow Chrome is easy to apply with an airbrush. The Basecoat plays an important role. The colour of the Basecoat determines the obtained Shadow Chrome effect. If the Basecoat is dark coloured (Black, Dark Blue, etc.) you will obtain a dark chrome effect. If applied over a light coloured Basecoat (White, Grey, Silver, etc.) you will obtain a lighter Shadow Chrome effect. Leave Basecoat for 60 minutes before applying the Shadow Chrome. You will notice a difference in effect when using a satin or gloss finish. 

• 1st Step if you've never sprayed this product is to do test samples, or call our help line and get guidance to apply this product correctly, as this will not be sprayed the same as a regular base coat paint.
• Always spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Apply 2-3 coats of Basecoat leaving 10-15 minutes between coats. Allow 1 hour drying time before applying Shadow Chrome.
• Before opening the bottle, shake the Shadow Chrome well. Do not apply full or heavy coats, as this can cause a patchy appearance on the finished panel. The best application method is to apply very light coats to build up the appearance required. Allow 15 minutes flash off time between coats. Spray object in one continuous pass, rather than individual panels to avoid film build up on the edge of panels. This could cause a patchy appearance on the finished panel. Allow flash off time between coats.
• Allow 1 hour drying time before applying the Clearcoat.
• Apply 2K Clearcoat for a Real Deep Gloss finish.

Description:

Our Sparkle Pearls are the very best on the planet. Sparkle Pearls exhibit the brightest and most vivid colours due to there large size and give a sparkle effect in bright light/sun light. Sparkle Pearls are like no other pearls on the market, as each colour gives off colours within the colour pearl. Apply our Sparkle Pearls over any Base colour to produce a real custom effect.

(Note: This product is a translucent Midcoat and can be sprayed over any Base colour.  All pictures provided are sprayed over a Black Basecoat. Basecoat colours are not included.)

The Inspire Airbrush range is twice the strength as our Custom Paint range. This is to help reduce the amount of coats needed for the airbrush artist. All colours come ready to use.

Inspire Airbrush Sparkle Pearl Colours:

• Blue Sparkle Pearl
• Copper Sparkle Pearl
• Fire Gold Sparkle Pearl
• Gold Sparkle Pearl
• Green Sparkle Pearl
• Purple Sparkle Pearl
• Rainbow Sparkle Pearl
• Red Sparkle Pearl
• Silver Sparkle Pearl
• Super Copper Sparkle Pearl
• Turquoise Sparkle Pearl

Application:

• Always spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Apply 2-3 coats of Basecoat leaving 10-15 minutes between coats.
• Apply 2-5 coats of Sparkle Pearl depending on the effect you desire. Leave 10-15 minutes between coats. 
• Apply 2K Show Clear for a Real Deep Gloss finish.

Description:

Spectracoat is a Prismatic tidal wave which creates alluring 3D iridescent colours that appear to move right before your eyes! Spectracoat looks like liquid silver in low light and a flowing liquid silver rainbow in bright light. Rounded, curved surfaces and sharp angles will highlight the magical appearance of Spectracoat. 

Inspire Airbrush Spectracoat Colours:

• Spectracoat Black
• Spectracoat Blue
• Spectracoat Green
• Spectracoat Gunmetal
• Spectracoat Light Pink
• Spectracoat Light Blue
• Spectracoat Light Pink
• Spectracoat Light Purple
• Spectracoat Light Green
• Spectracoat Pink
• Spectracoat Purple
• Spectracoat Silver

Spectrum FX Colors:

Spectrum FX Custom paints are based on a unique pigment that sparkle and shimmer through the light spectrum when viewed from different angles, rounded curved surfaces and sharp angles will highlight the magical appearance of Rainbow XL. Apply over any base color for a real custom effect.

Available in Silver

Comes ready to use but can be reduced up to 100%

Description:

Inspire Intercoat Clear can be used as a protective inter-coat. Inspire Intercoat Clear has excellent film build and adhesion, beautiful flow characteristics and superb levelling. It has minimum sag and good vertical stability which is so important when working with specialist additives and has been specially formulated as a carrier of Pearl powders and our Metal Flake range.

Inspire Reducer is a premium reducer

                             .

2K CLEAR-COAT CANZ:

Specialist Paints brings you 2k Clear Coat in a aerosol can. The 2K aerosol is a brand new design unlike any other aerosol on the market, Its a better design then any other giving high output with excellent Atomization and high transfer efficiency with no pressure drop during application. Using our 2K CLEAR CANZ can save on time & labour with no mixing or Spray gun cleaning. 2K CLEAR CANZ has good flow giving a great high gloss finish.

2K Clear-Coat CANZ is a great product for Vehicle spot repairs and small jobs that require High Gloss with strength and toughness of a Automotive lacquer.

PLEASE NOTE:  2K aerosols are single use only.  The contents must be used within 24 hours of the can being activated but for optimal finish we recommend application within 12 hours.

400ml 2K Clear-Coat CANZ Performance:

• 2-component technology (in-can activator system)
• High Gloss providing high scratch resistant
• Spray gun finish
• Quick Drying-time
• Excellent flow
• Easy polishing
• Up to 24hr pot life
• Particularly suitable for Vehicle Spot Repair

Kustom Canz 1K Primer:

Kustom Canz 1k Primer is a premium primer-surfacer for fast spot priming providing a smooth pin hole free surface that is easily sanded.  Can be used directly onto many difficult substrates including alloy, stainless steel, zintec and galvanized. 

Kustom Can 1K Primer is available in 3 colours: White, Grey and Black

400ml 1K Primer Performance:

• Excellent adhesion and anti-corrosive properties.
• Quick drying-times.
• Spray gun finish achievable.
• Excellent smooth surface finish.
• Particularly suitable for vehicle spot repair.
• Available in 3 colours: white, grey & black.

APPLICATION:

• Remove all rust from metal surfaces.
• Clean surface with a suitable degreaser then abrade.
• Areas to be sprayed must be dry, free of grease and dust.
• Shake the aerosol can for at least two minutes after the agitator ball is free
• Carry out a test spray before spraying your project.
  
• Apply 1-2 coats wet coats,
• leave 10-15 minutes between coats.  
• Drying time 30-60mins @ 20`C  or 3 minutes using infrared heat.
• After use, turn the aerosol can upside down and spray to clear the valve.

Kustom Canz 1K Plastic Primer

A low solid, fast drying, transparent ready for use primer designed to provide adhesion to a wide range of plastics. Specially designed for flexible plastic car parts manufactured from, polyolefin, polypropylene and ethylene propylene modified. A524 Primer should be used only on those plastic parts that have no existing primer or other coating applied.

Use of a 2 component undercoat prior to topcoat is not necessary unless higher build is required. The plastic

primer can be topcoated directly.

• Excellent adhesion.
• Quick drying-times.
• Ideal for transparent plastic.

APPLICATION:

• Clean surface with a suitable degreaser
• Areas to be sprayed must be dry, free of grease and dust.
• Shake the aerosol can for at least two minutes after the agitator ball is free.
• Carry out a test spray before spraying your project.
  
• Apply 2 coats coats.
• Leave 5 minutes between coats.  
• Wait 15 minutes before beginning paint process. 
• After use, turn the aerosol can upside down and spray to clear the valve.