Metal Flake FX - Size: Medium
METAL FLAKE FX is an EASY to apply Metal Flake Paint.
Metal Flake FX is highly concentrated with our Metal Flake and full coverage can be achieved with in a few coats, which then can be 2K clear coated or be used as a base for our Candy effect paints.
Metal Flake FX paints are available in 3 sizes of Metal Flake: Small (004 Hex), Medium (008 Hex) and Large (015 Hex).
The Metal flake FX paint range:
- BLACK METAL FLAKE
- SILVER METAL FLAKE
- GUNMETAL METAL FLAKE
- GOLD METAL FLAKE
- DARK GOLD METAL FLAKE
- BRONZE METAL FLAKE
- ORANGE METAL FLAKE
- FLAME RED METAL FLAKE
- PINK METAL FLAKE
- PURPLE METAL FLAKE
- BLUE METAL FLAKE
- DEEP BLUE METAL FLAKE
- GREEN METAL FLAKE
- EMERALD METAL FLAKE
- COPPER METAL FLAKE
- WINE RED METAL FLAKE
- FUCHSIA METAL FLAKE
- CLEAR METAL FLAKE
- SKY BLUE METAL FLAKE
- BLURPLE METAL FLAKE
- PLUS ALL OUR HOLOGRAPHIC AND PRISM FLAKE COLOURS
METALFLAKE FX Paint Kits:
METALFLAKE FX 1 Litre Kit: Amazing Value!!!
- 1 Litre of Base coat (Any Colour)
- 1 Litre of METALFLAKE FX (Any Colour)
- 1 Litre of D-Thinner
- 1 Litre 2K Show Clear Kit (includes Activator)
METALFLAKE FX 3 Litre Kit: Amazing Value!!! of Base coat (Any Colour)
- 3 Litres of Base coat (Any Colour)
- 3 Litres of METALFLAKE FX (Any Colour)
- 3 Litres of D-Thinner
- 3 Litres 2K Show Clear Kit (includes Activator)
Metal flake FX Application:
Apply our Metal Flake FX over any base colour to produce a real custom effect. Depending on how heavy you want the flake effect, will depend on the amount of coats applied.
(Always spray test panels before spraying your product or project)
- Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
- Apply 2-3 coats of Base coat
- Mix Metal flake FX 2-1 with D-thinner and stir well.
- Apply 1-6 WET coats depending on the effect you desire. Leave 10-15 minutes between coats.
- Apply our 2k Show Clearcoat for a Real Deep Gloss finish
Spray Gun Size for Metal Flake:
(SMF) Small Flake is our fine cut flake at .004 x .004 hex. SMF flake size can be sprayed through most large size tip airbrushes, as well as HVLP full and detail sized spray gun equipment with a 1.0 nozzle set-up or larger. SMF lays down much flatter then MMF, LMF and XMF so it's easier to finish with clear.
(MMF) Medium Flake is our medium cut flake at .008 x .008 hex. MMF flake size has a sparkling brilliance that is easy to use. MMF can be sprayed out of HVLP and conventional spray equipment with a minimum of 1.5 nozzle set-up or larger.
(LMF) Large Flake is our large cut flake at .015 x .015 hex. LMF flake size has double the amount of sparkling brilliance of the LMF and has been used in the custom market for many years. LMF can be sprayed out of HVLP and conventional spray equipment with a minimum of 1.8 nozzle set-up or larger.
(XMF) Extra Large Flake is our extra large cut flake at .025 x .025 hex. XMF is an extreme size flake gives a extreme amount of sparkle. XMF can be sprayed out of HVLP and conventional spray equipment with a minimum of 2.2 nozzle set-up or larger.